You have to first carry out a very good and common inspection upon your car for rust checking, when rust continues to be small and has not spread, you possibly can deal with it very easily and with just few and easy tools. Take this as a precautionary measure and do it often, so that you are not caught unawares, and since some rust could be occuring in a hidden part of your vehicle's panel that may not be simply seen till you do some checking.
2. Once you find a rust spot, you will have to prepare that spot for the repair work you want to carry out. You will have to first remove the rust by rubbing the affected floor with alcohol or white spirit and coarse sandpaper or better still, a sturdy wire brush.
3. Dispose of every other rust you will discover on the panel or any free paint, conserving scrapping till you get a really clear surface. Then treat the spot with a rust removing solvent and clean with rag. The reason being that, any little bit of rust still left behind can still widen like virus and it will additionally not enable your repair work to be perfect.
4. Scrape around the affected space using a coarse sand paper, allow a wider range, until all the space around the rust spot are fully clear of rust and paint, because in a way, very tiny rust may need started developing in them, and you have to stop this.
5. As you would need to apply putty in your work, you'll have to tape off the unaffected areas to protect them if you find yourself making use of putty and paint.
6. Spread glazing putty on the affected areas to coat the rusted but cleansed spot and fill all of the pits and scratches and make the surface to flush with remaining parts of the body. Do that evenly on the surface and allow it to dry.
7. Get the right colour matching that of your car manufacturer's, from a paint chip or an identification plate under the car's hood, then with the sample, go to a car paint store and buy the paint and the primer.
8. First paint with the primer or the underlay paint, then paint with the true colour for the body part, after the primer has dried. Apply the painting two or three times, then enable it to dry to be able to polish and wax the affected part to finish.
With good and regular car rust repair, you may retain your car's body parts suitably maintained for a long time with none main repair work achieved, and at very minimal cost.
If rust is still a problem to you, you can get car rust repair solution from the experts now
7 Июль 2010